Steel Fabrication Quotes
from local steel fabricators
Strong steel driveway gates including lift-off hinges - no cladding needed.
Alistair requested 3 quotes from Steel Fabricators in Mount Waverley
I am looking for a pair of large, galvanised, custom made driveway gates with lift-off hinges. The total width is about 2800, with one leaf being 1100mm and the other leaf 1700mm. The height is about 2550mm. I only require the frames, hinges and installation as I will organise the cladding. The cladding will be heavy so the frames and hinges will need to be strong enough to take the load. The gates must also have lift-off hinges so at times they can be removed for maintenance and additional width for access for a large caravan.
Steel Fabricators that Responded
Gold Grade steel welding fabrications
Paul is gold. Fast , friendly, professional service, at a competitive rate. I could not be happier with the design, fabrication and installation of a large, custom pair of steel gates, and would highly recommend Paul for any steel fabrication work.
· over a year agoQuote Details
- Suburb Mount Waverley, VIC 3149
- Specialisation Steel Frames
- Date Listed 6 Nov 2012 - 8:07 am
Similar Quote Requests
Cut down metal bars
Cutting down the steel frame of a pergola and a steel rail
Replace a steel pole to support a car port
My car port is supported by steel/iron poles. One of them is rusty and needs...
Onsite Truss and cleat Welding
Require 2 x truss frames nitre cut and full penetration butt welded,...
Small canopy steel framed & sheeted & erected
site measure. canopy approx. 2.75m x 1.5m. frame up canopy out of rhs & sheet...
Steel Fabrication Quotes
from local steel fabricators
