Jobs Board Steel Fabrication Jobs Steel Fabrication Jobs

Structural steel for 9 warhouses to be fabricated and erected Structural steel for 9 warhouses to be fabricated and erected

After some sheet metal edging for their new cook top (as the new one is too small for the current hole) After some sheet metal edging for their new cook top (as the new one is too small for the current hole)

Hi, Looking to discuss a project involving metalwork. We have the image and dimensions and require a professional to create this for a business. Please contact to discuss further Hi, Looking to discuss a project involving metalwork. We have the image and dimensions and require a professional to create this for a business. Please contact to discuss further

8 APARTMENT PROJECT, STRUCTURAL STEEL WORKS OVER 4 LEVELS: PFC, UC, SHS, ANGLE, STIFFNERS, SUPPLY AND INSTALL. WELDING AND BOLTING TO NEW STRUCTURE. SHS FRAMEWORK TO SCREENS AND BALUSTRADE DETAILS.... 8 APARTMENT PROJECT, STRUCTURAL STEEL WORKS OVER 4 LEVELS: PFC, UC, SHS, ANGLE, STIFFNERS, SUPPLY AND INSTALL. WELDING AND BOLTING TO NEW STRUCTURE. SHS FRAMEWORK TO SCREENS AND BALUSTRADE DETAILS. MSG ME YOUR EMAIL SO I CAN SEND DRAWINGS AND SPECS.

Doing a small extension in Northcote, will need 4 posts 90x90x5 2 pfc's sitting on them , one more pfc further back and some 90x90x5 shs welded between post with droppers from pfc Doing a small extension in Northcote, will need 4 posts 90x90x5 2 pfc's sitting on them , one more pfc further back and some 90x90x5 shs welded between post with droppers from pfc

steel cover for an inbuilt bbq to stop rain penetrating into the cabinet below steel cover for an inbuilt bbq to stop rain penetrating into the cabinet below

Please see design attached. Please see design attached.

12 step steel stairs fabricated 12 step steel stairs fabricated

This is to hang underneath my above-bench kitchen cabinets, to support a glass shelf on the 15cm side. The 20cm side will screw to the underside of the cabinets. The 31cm side will drop down and be... This is to hang underneath my above-bench kitchen cabinets, to support a glass shelf on the 15cm side. The 20cm side will screw to the underside of the cabinets. The 31cm side will drop down and be flush with the splash back. The 15cm will support a glass shelf.

Structural Steel work for a canopy structure to front of community hall and structural works for shines to roof structure Structural Steel work for a canopy structure to front of community hall and structural works for shines to roof structure

require structural steel for framing on an extension. require structural steel for framing on an extension.

This job is for a shop front in Chadstone Shopping Centre. Elevated drawings are available, but we are still waiting engineer drawings to arrive in next couple of days. This job is for a shop front in Chadstone Shopping Centre. Elevated drawings are available, but we are still waiting engineer drawings to arrive in next couple of days.

Encase automatic gate mechanism with an external motor cover (for Pass 800 auto gate) and sensor beams (steel protective covers) to prevent damage and vandalism. Covers need to be created and... Encase automatic gate mechanism with an external motor cover (for Pass 800 auto gate) and sensor beams (steel protective covers) to prevent damage and vandalism. Covers need to be created and installed.

Good evening; My partner and I are starting a paper architecture business to supply partitions to events and installations. http://www.clgpaperdesign.com/ I am looking for someone that can... Good evening; My partner and I are starting a paper architecture business to supply partitions to events and installations. http://www.clgpaperdesign.com/ I am looking for someone that can fabricate the following for us, ideally for mid-next week, please see description below. As we are kicking off with the business and this is our first installation we are running a bit short on time, could you provide a quote for us in the next day or two, your help would be much appreciated. See description below: Amount of pieces needed: 14. A 300x300mm steel plate base (3-5mm thickness) with a threaded couple welded to its center to screw a 1900mm threaded steel pipe (pipe should be included in the quote). OD of the pipe can be less than 1 inch. The whole structure should weight about 2.2kg in order to be able to hold a paper partition

Hi, I need a rough price for for a steel beam that spans 11m and takes the load of a coulorbond roof. Also include in price supports at each end and crane to install. I have not got engineers... Hi, I need a rough price for for a steel beam that spans 11m and takes the load of a coulorbond roof. Also include in price supports at each end and crane to install. I have not got engineers plans yet so i was hoping you would be able to work out dimensions of the steel.

metal fabrication needed to supply and install for 3 town houses Soon, please contact me for details and plans metal fabrication needed to supply and install for 3 town houses Soon, please contact me for details and plans

steel fabrication required to supply and install builder steel for 3 town houses steel fabrication required to supply and install builder steel for 3 town houses

fabrication of steel brackets for scaffolding (x15) fabrication of steel brackets for scaffolding (x15)

New House Build, Low Set, 4 Bed New House Build, Low Set, 4 Bed

All structural Steel beams to be supplied and erected as per the architectural and engineering drawings for 17 warehouses / industrial units ranging in size from 100 m2 - 150 m2 All structural Steel beams to be supplied and erected as per the architectural and engineering drawings for 17 warehouses / industrial units ranging in size from 100 m2 - 150 m2

Looking for Steel Fabricators to undertake Structural Steel Works supply and installation for a new FOODWORKS STORE Looking for Steel Fabricators to undertake Structural Steel Works supply and installation for a new FOODWORKS STORE

Need a full steel staircase with stringer to be manufactured and installed. Need a full steel staircase with stringer to be manufactured and installed.

pre fab installation for Steel frame and trusses for double story house in Greenvale pre fab installation for Steel frame and trusses for double story house in Greenvale

2 Vehicle access gates and 2 pedestrian gates plus 5.0m of fencing for 2 units in Camberwell 2 Vehicle access gates and 2 pedestrian gates plus 5.0m of fencing for 2 units in Camberwell

I need two custom made wall mounted brackets for a home made ballet barre. The brackets need to extend from the wall and finish with a circular piece that holds a 25mm diameter wooden dowelling. I need two custom made wall mounted brackets for a home made ballet barre. The brackets need to extend from the wall and finish with a circular piece that holds a 25mm diameter wooden dowelling.

Require a steel frame for front gate approx 4000x2100mm . Gate to be clad with picket pailing . Require a steel frame for front gate approx 4000x2100mm . Gate to be clad with picket pailing .

I need a cellar ladder it is to be 2630 mm tall and 1100 mm horizontal to fit the space. Width is to be 600 mm. I can supply more info by email including photos of space and similar ladders. I need a cellar ladder it is to be 2630 mm tall and 1100 mm horizontal to fit the space. Width is to be 600 mm. I can supply more info by email including photos of space and similar ladders.

Steel fabrication for 20m2 roof Deck Steel fabrication for 20m2 roof Deck

Hi there, I'm in need of a shs- 89x89x5 column @3.2, 1- 200x75 pfc @2.9 and 1- 230x75 pfc @5.2. Also labour to install cheers sam Hi there, I'm in need of a shs- 89x89x5 column @3.2, 1- 200x75 pfc @2.9 and 1- 230x75 pfc @5.2. Also labour to install cheers sam

Several steel stumps to be replaced Several steel stumps to be replaced