Replace and install a hot water system

Anna requested 1 quotes from Plumbers in Lalor

  My mums hot water system has burst and needs to be replaced. The old system was a vitreous enamel steel tank has been removed and a new concrete slab laid down. It's was a gas storage system - not continuous flow with all 1/2 inch gas and water inlet and hot water delivery pipe work in place. The system would need to be supplied and installed with some modification of pipe work layout and positioning almost certainly required. As such given the pipes will need some fiddling, rather than replacing like for like, I am open to a stainless steel tank or continuous flow system. Job is in Lalor and only licensed plumbers will be accepted.

Plumbers that Responded

Anderson Plumbing

Quote Details

  • Suburb Lalor, VIC 3075
  • Specialisation Plumbing Installations
  • Date Listed 5 Jun 2016 - 10:48 pm

Similar Quote Requests

Install a new dishwasher in the kitchen,brand:whirlpool.
Have just purchased a new dishwasher and now am looking at installing this asap.

Plumber to connect water tank
install water tank

Plumbing - connection of new hot water unit. new gas line req'd from meter
Connection of Rinnai Infinity 26 with new (25mm ?) line from meter....

Water tank pump (for toilets) moved.
Water tank pump (connected to cisterns) needs to be disconnected, moved near...