Thomas requested 3 quotes from Plumbers in Stafford Heights
we currently have a downpipe going to a rainwater tank and then coming back out of it to take overflow back down the downpipe. its always overflowing so we need the pipe cut, a diverter (which we have) installed and then the overflow pipe sealed. this will allow us to leave the water going straight down the downpipe as a default position and when we want to fill the tank, turn the diverter on to fill it and then turn it back again.
it would take no more than a couple of metres of 90mm pvc pipe, some pvc glue and a "plug" for a 90mm pvc pipe. i just dont have the tools to cut etc and by the time i bought the tools and gear it might work out cheaper to get someone else to do it.
Insinkerator needs repair. blades not moving and now drain is blocked
Insinkerator blades not moving and now drain is blocked
Checking of water meters in a small complex
we want to have individual readings and brisbane council wants a written...
Tiger01
general plumbing
Create penetration adaptor and fit Ilve b2 crystal chimney hood
Ducting size is 150mm but escape hole is 100mm need the correct fittings to...