Glynn requested 3 quotes from Landscapers in Willoughby
Retaining wall south & east boundary (east side height varies from 300mm to 2000mm along 15m wide land width; south side height varies from 2000mm to 400mm for 25m along south fenceline):
1. demolish existing fence & disposal
2. surveyor set up the boundaries
3. excavate behind timber fence to accommodate new retaining wall
4. excavate 54 holes (500x300x350) providing blob footing to hold posts in place
5. pour rapid set concret to stabilise
6. supply treated pine timber posts
7. supply (3000x200x100) treated pine sleepers
8. supply bollts & screws with washer to hold sleepers in place
9. supply approx 500 special nails to hold rails in place
10. supply approx 14m3 of blue metal which is to be placed on top of agricultural pipe behind
11. hire stump grinder to grind out runner roots of large cmphor-laurel tree
12. supply and install new timber illing fence (approx 35m length)
retaining wall north side (approx 25m long x 1m high [some variation in height to rear])
1. excavate 200x300 to place first block
2. supply and compact road base as solid base for first row
3. supply and lay heathstone system (grand unit) 162x440x270
4. supply and lay capping (classic unicap) 230x340x50
5. supply and install egg line
6. place blue metal behind the retaining wall
7. supply and pour 20 mpa concret to footpath
8. supply and place f72 wire mesh
9. formwork to steps (approx 5)
10. final clean up
Manna Landscapes
Collapsed retaining wall - boundary fence
Retaining wall is collapsing and need to rebuild it. It is a boundary wall.
Landscaping of the back garden
The backyard has been already excavated to an agreed design, with trenches...
Repair existing stone / brick retaining wall
Tree roots pushing over part of the retaining wall, tree being removed now !...
Building small retaining wall + capped picket fence
Looking to build a new boundary fence. Approx 12.5m long. Looking to build...