Pay Driveway crossover done in Boral Ezipave sahara in herringbone design

Adam requested 3 quotes from Landscapers in Banksia Grove

  I require Boral Ezipave sahara pavers to be used for Driveway crossover.

Can I get a quote for both Herringbone designs?

Needs to satisfy the following rules from Local Council:
Pavers Minimum 60mm heavy-duty rectangular or square unit

Brickpaving
• 90 Degree Herringbone
(230 x 115mm standard, 230 x 152mm pavers or 230 x 115mm interlock)
• 45 Degree Herringbone
(230 x 115mm standard, 230 x 152mm pavers or 230 x 115mm interlock)

Bedding
20 to 40mm thick compacted yellow bricklayers sand

Sub-base
100mm thick compacted crushed limestone or rock base

Edge Restraints
250mm wide and a minimum of 80mm deep concrete edge restraint strong enough to withstand vehicle impact and prevent any lateral movement of the bricks. Visible edge restraints shall be installed flush to the level of the pavers.

Quote Details

  • Suburb Banksia Grove, WA 6031
  • Specialisation Paving & Stonework
  • Date Listed 18 May 2013 - 10:02 pm

Similar Quote Requests

Paving crossover
Cross over 13M bin area next to house 4M we have the pavers

Paving to side of house
A new build, we will pave the reamainder but the narrow side of the house...

Soakwells at the front
soakwells seem to have broken (plastic ones). Need replacing them with...

130 sm of paving in backyard needs to be lifted up and relayed properly
The paving is mostly under a patio the sand base was done properly but the...