Heating Quotes
from local businesses
Repair braemar tm100i microstar gas furnace and ducting heating
Neale requested 2 quotes from Heating Professionals in Lilyfield
We have a braemar tm100i microstar furnace and a ducted underfloor heating system. it's somewhere between 12 and 15 years old. it was a great heating system when it worked. a renovation years ago blocked the intake duct and the heater began to work sluggishly. it now seems to work, in that it turns on when you toggle the power, but it switches off. i don't think there is a lot wrong. we have tried to find braemar specialists but now would prefer to work with a good general tradesperson. the intake duct needs to be repositioned. there are some good candidate positions. there may be some adjustment or replacement part required for the furnace. access is good. i have photographs of the furnace if required. here are the technical details of the furnace: braemar model: tm100i microstar serial: m9705029 gas type: n.g gas pressure: 0.875 kpa inject: 3.0 mm nom capacity: 40 mj/hr air flow: 130 - 230 l/s recommended temp rise: 30 degrees c recommended cabinet static pressure 75 pa volts: 240 amps: 1.7 watts: 400
Quote Details
- Suburb Lilyfield, NSW 2040
- Specialisation Heating Repairs
- Date Listed 23 Jul 2008 - 10:25 am
Similar Quote Requests
Service gas open fire, takes longer to ignite than usual
Gas open fire was installed 4 years ago and needs general maintenance....
Gas heater needs repair
the heater is built in the fireplace (see picture). when the gas is turned on...
Repair of a gas heater pyrox, when switched on doesn't sustain flame, pilot may need attention
When i switch on the heater , it does not sustain the flame. . maybe the...
Repair underfloor Braemar microstar gas furnace & ducting
We have a braemar tm100i microstar furnace and a ducted underfloor heating...
Heating Quotes
from local businesses
