Identify the problem of STADT P25 heater and FIX it.

Warren requested 3 quotes from Heating Professionals in Canterbury

  regular service of STADT P25 gas heater and Brivis cooler system;
Identify the problem of STADT P25 heater and FIX it.

The problem description: I turned on the heater system, it worked well for about two hours. When I set the thermostat to off position. It didn't stop and only fan was in operation without heating. I found the thermostat indicated " battery replacement".
After I replaced the battery, I still can't turn off the system. Only after I turned off the power of the heater, the system stopped operation. But when I turned on the power, the system worked again without hot air, even though the thermostat was set at off position.

I pressed the reset and lockout button in the main board of the heater according to the instruction on the panel. There are 3 flash every 2 second in the LED, which means there is fault in Gas Valve.

i would like a free quote to regular service, Identify the problem and repaired the system with spare parts for stadt.

Heating Professionals that Responded

Inspired Plumbing Services

Cool Heat Pty Ltd

GRECH Heating & Cooling

Quote Details

  • Suburb Canterbury, VIC 3126
  • Specialisation Gas Heating
  • Date Listed 23 Jun 2019 - 1:13 pm

Similar Quote Requests

To service my gas heating
to service my gas heating

Gas heater repair
Have a Vulcan Quasair gas wall heater - pilot light keeps going out - and...

Vulcan powerhouse 80 gas heater - service
Vulcan Powerhouse 80 gas heater starts up and runs OK. However, a 'DSI...

Brivis gas ducted heater he301xa not igniting, error code #50..
the unit had started and stop with error code #50. try few attemp, didn't...