Glue down T&G flooring onto concrete slab, sand and seal

Alphonse requested 3 quotes from Floorers in Berwick

  I have purchased enough 65x22mm thick Tas Oak flooring to cover 92 square metres of concrete slab. I require the floor to be glued directly, sanded and sealed as well as any moisture sealing and levelling of the slab beforehand. I have set aside 1 week for the job to be done in late September.

Floorers that Responded

Born Again Floors

Globe Williams (Aust) Pty Ltd - DNC

Quote Details

  • Suburb Berwick, VIC 3806
  • Specialisation Install Strip Flooring
  • Date Listed 7 Aug 2007 - 4:18 pm

Similar Quote Requests

Installation/sanding/polishing of solid timber strip flooring
Interested in the Boral Uni-Nail Strip Flooring, install, sand, polish....

Lay timber flooring
four bedroom, two living areas, staircase, double story house. need someone...

Lay down timber flooring in three rooms
total of 64 m2 maple timber flooring, 18 mm thick. can be installed as...

Concrete Polishing
Required for 2 rooms approx 5x3metres and 4 x 3metres.