Paling Fencing

Nick requested 3 quotes from Fencing And Gates Professionals in Caulfield North

  Details as follows

Job is split into 2 parts, so 2 quotes required.

Part #1
3.7m of fence @ 2.4m height.

Part#2
10m of fence @ 2.4m height & 32.5m of fence @ 2m.

As part of the job the following is required.

- Demolition and removal of existing paling fence.

- Post holes for 2m high section of fence to be set at a minimum of 600mm depth and 300mm square
which is to be filled with minimum 1.5 bags of concrete which is pre-mixed prior to pouring into hole.

- Post holes for 2.4 high section of fence to be set at a minimum of 800mm depth and 300mm square
which is to be filled with minimum 2 bags of concrete which is pre-mixed prior to pouring into hole.

- Sections of fence which are at 2.4m height to be installed with 4 rails.

- All rails to be fixed to posts at each intersecting point with nails and 100mm galvanized bugle batten head screws.

Please note ground is flat has good access and is clear of trees.

Fencing And Gates Professionals that Responded

Spot On Maintenance And Fencing

Plum Fencing

Immaculate Fencing

Quote Details

  • Suburb Caulfield North, VIC 3161
  • Specialisation new Timber Fence
  • Date Listed 17 Oct 2019 - 8:06 am

Similar Quote Requests

PALING FENCES
PALING FENCE SIDE AND BACK OF PROPERTY

Replace Boundary Paling Fence
Remove existing fence Replace with 2.0M high treated pine fence (including...

REPAIR WOODEN PAILING FENCE
FENCE - WOODEN PAILING

TIMBER FENCING INSTALLATION
TIMBER FENCING INSTALLATION