Jobs Board Fencing & Gates Jobs in Windsor Fencing & Gates Jobs in Windsor

I’m looking for a quote on a galvanised sliding gate frame as well as a hinged gate (I'll eventually add vertical timber battens), The gap under the house that the gate will be going into is... I’m looking for a quote on a galvanised sliding gate frame as well as a hinged gate (I'll eventually add vertical timber battens), The gap under the house that the gate will be going into is 2004mm high so I’m happy to take guidance on the recommended height of the gate but I’m thinking 1950mm to allow for tracking that will need to come off the post. Can you please quote on: • A mild steel sliding gate (gal) 3500 x 1950 • All tracking material (wheels, floor tracking, catcher bracket, block and channel and gate stop). • A post 2280mm high (I’m not 100% sure where to setup the post but just under the house is a beam so this can then be attached from the concrete slab to this beam). We are in a potential flood area so I’d like to attach a platform to this post so we can keep the motor up 1000 off the ground. I have images of similar setups. • A pedestrian gate 895mm wide (the gap is 900mm exactly) x 1900 high with hinges and latch. • Delivery to Windsor, QLD 4030. • Please also quote for a measurement check to confirm I have provided the correct information. I look forward to hearing from you with a quote and possible time frames to have the material delivered. My mobile is 0410 455 040.

fence needs new posts, old posts have dry rot and replace broken fence palings and re align gate fence needs new posts, old posts have dry rot and replace broken fence palings and re align gate

6m long fence (approx 1.4m high) including 1m gate at right angle to front fence alongside driveway (some pickets available from 2.8m redundant gates); shortening front fence by .2m to widen... 6m long fence (approx 1.4m high) including 1m gate at right angle to front fence alongside driveway (some pickets available from 2.8m redundant gates); shortening front fence by .2m to widen driveway entrance.