Jobs Board Fencing & Gates Jobs in St Kilda Fencing & Gates Jobs in St Kilda

Supply and construct new flat top picket fence 1.8m high x approx. 8.2m street frontage. Have planning permit. Include 1 main pedestrian gate plus 1 'bin' gate. Painting by others. Existing old... Supply and construct new flat top picket fence 1.8m high x approx. 8.2m street frontage. Have planning permit. Include 1 main pedestrian gate plus 1 'bin' gate. Painting by others. Existing old steel fence to be removed. Service pipes in ground are exposed.

I would like og get a quotes please - i did this before but only got one response. I would like og get a quotes please - i did this before but only got one response.

Removal of damaged fence and vines. New paling fence/ Removal of damaged fence and vines. New paling fence/

The Owner's Corporation of my block of flats need to replace our front fence. We want steel see through fencing 6ft high with a gate and 8 mailboxes. We have a couple of ideas on what materials but... The Owner's Corporation of my block of flats need to replace our front fence. We want steel see through fencing 6ft high with a gate and 8 mailboxes. We have a couple of ideas on what materials but open to suggestion.

requires new paling fence and gate. Contact via mobile only. requires new paling fence and gate. Contact via mobile only.

I have a corner car space that needs to be turned into storage. One side is 3.64m, the front is 2.65m and it is 2.2m high. We need to put a trailer in there so the front needs to be a full width... I have a corner car space that needs to be turned into storage. One side is 3.64m, the front is 2.65m and it is 2.2m high. We need to put a trailer in there so the front needs to be a full width gate. Will also need screening material for privacy.

Require new side fencing for both sides of my property plus a new back fence for my neighbour's property. Require new side fencing for both sides of my property plus a new back fence for my neighbour's property.

New Custom Wrought Iron Electrical / Automatic Gates required. Going through fast track for council planning permission. (Heritage Listed) New Custom Wrought Iron Electrical / Automatic Gates required. Going through fast track for council planning permission. (Heritage Listed)

We require two areas to be filled with cyclone fencing. One area is 2700 x 1850 which would also require a gate. The other area is approx 3500 long x 1625 one side and 1060 the other (a wedge shape) We require two areas to be filled with cyclone fencing. One area is 2700 x 1850 which would also require a gate. The other area is approx 3500 long x 1625 one side and 1060 the other (a wedge shape)

Storage cage wiring has been cut, panels need replacing. Storage cage wiring has been cut, panels need replacing.

Dismantle and take aawy old fence Install new approx 2 m high 14 m long paling side back fence beween 2 properties. Easy access to fence and to take away old fence. Dismantle and take aawy old fence Install new approx 2 m high 14 m long paling side back fence beween 2 properties. Easy access to fence and to take away old fence.

43.9 linear mt of 3m high, black cyclone fence plus 1 x 1m & 1 x 2m gates. The gates swing to each other 43.9 linear mt of 3m high, black cyclone fence plus 1 x 1m & 1 x 2m gates. The gates swing to each other

NEED IT BE OF A COMMERCIAL QUALITY NEED IT BE OF A COMMERCIAL QUALITY

My boundary paling fences need replacing. All neighbours have agreed. I need an inspection and advice My boundary paling fences need replacing. All neighbours have agreed. I need an inspection and advice

I need a 6.5m long x 2.1m high standard pailing fence. I also need new posts and a few boards to end two existing paling fences that were cut short to allow construction. I need a 6.5m long x 2.1m high standard pailing fence. I also need new posts and a few boards to end two existing paling fences that were cut short to allow construction.

Sliding security gate to secure off underground car park and removal of old swinging security gate. Sliding security gate to secure off underground car park and removal of old swinging security gate.

Storage cage needed in a car parking area behind our shop & another smaller cage on a wall above car bonnet height. Storage cage needed in a car parking area behind our shop & another smaller cage on a wall above car bonnet height.

Remove existing 7m long paling fence and vegetation and replace with new 2m high paling fence all inclusive including removal of all waste. Remove existing 7m long paling fence and vegetation and replace with new 2m high paling fence all inclusive including removal of all waste.

right hand side paling fence built with concrete posts length 37.8m height 8ft removal of old fence right hand side paling fence built with concrete posts length 37.8m height 8ft removal of old fence

I need a fence fully replaced either side of my yard. one side is 4.5cm long and the other side is 7.5cm long. I am looking at 2.1m high paling fence. I need a fence fully replaced either side of my yard. one side is 4.5cm long and the other side is 7.5cm long. I am looking at 2.1m high paling fence.

We have an existing timber fence that needs to be taken down and new one put in. The other side needs a new fence with a gate. We also have a colour bond fence on the other side which has timber... We have an existing timber fence that needs to be taken down and new one put in. The other side needs a new fence with a gate. We also have a colour bond fence on the other side which has timber posts which are rotten and they need a fix.

existing picket fence to be replaced with similar design. Approx 5m in length and about 6 feet height. Gate also to be replaced Also 1m on either side to replace side fence existing picket fence to be replaced with similar design. Approx 5m in length and about 6 feet height. Gate also to be replaced Also 1m on either side to replace side fence

Gate in front fence badly vandalised. May be possible to place new wood slats on the frame; more likely, replacement warranted. Gate in front fence badly vandalised. May be possible to place new wood slats on the frame; more likely, replacement warranted.

The rear fence of our property needs replacement. the new fence will be a timber paling fence, higher than a regular fence with some battens above the standard fence. about 3m of the fenced... The rear fence of our property needs replacement. the new fence will be a timber paling fence, higher than a regular fence with some battens above the standard fence. about 3m of the fenced area is to be battened from the ground up. there is easy access from laneway and no planting in the way.

Side gate off factory is in poor condition needs attention Side gate off factory is in poor condition needs attention

We need to install a short side fence and gate to keep cats enclosed in back garden of house. We need to install a short side fence and gate to keep cats enclosed in back garden of house.

Seeking a builder who specialises in fencing of a building of 15 units in St Kilda with the front and hopefully the back for the carpark. We will have intercom for the gate infront and remote... Seeking a builder who specialises in fencing of a building of 15 units in St Kilda with the front and hopefully the back for the carpark. We will have intercom for the gate infront and remote control for the carpark. We do not know if we are allowed a roll up door for the carpark or sliding door if possible because of the space. We would also relocate the rubbish bins to the rear and it might not be permitted because of the sewerage where we plan to relocate. We will also relocate the post boxes and that is not a problem. Because of a lot of regulation we are not aware of with the council permit, we would appreciate if you would be kind enough to give us a quick answer as we as a committe members intend to meet at the site on 8/8/10. Can you give us your details if it is a free quote or how much you will be charging?

We have a ledge on our balcony that is large enough to rest materials on, but it would be very easy to knock the items off. It is on the 7th floor of an apartment building and we don't want to... We have a ledge on our balcony that is large enough to rest materials on, but it would be very easy to knock the items off. It is on the 7th floor of an apartment building and we don't want to disturb the view. Dimensions for the safey glass: 260cm long, 15cm (approx) high 268cm long, 15cm (approx) high The lengths could be split into 2 pieces if necessary. The glass needs to be fixed to a wooden platform.

Repair and/or replacement of 10-20 meters of fence and install automated remote controlled sliding gate system. The fence is required to be approx 6' and of solid construction to enable privacy... Repair and/or replacement of 10-20 meters of fence and install automated remote controlled sliding gate system. The fence is required to be approx 6' and of solid construction to enable privacy between the house and the shared car park next door. The fence separates the car park and the courtyard garden of a heritage listed apartment. Ideally the automated gate system would be solar powered to avoid having to run power cables, but this is not necessary. Sympathy with heritage listed surrounds is required. The fence is primarily a single length with a single right angle corner and a short (2-3m) side fence/return.

2000mm galvanised mild Steel fence pickets - 50 x 8 mm pickets, on edge at 100 spaces., height of 1800mm. To match existing fence, photo of existing fence available. 2000mm galvanised mild Steel fence pickets - 50 x 8 mm pickets, on edge at 100 spaces., height of 1800mm. To match existing fence, photo of existing fence available.