Peter requested 3 quotes from Concreters in Bentleigh
The concreting is for a new driveway and a footpath to and landings for a pedestrian gate.
Part of driveway and most of footpath edges are curved.
Driveway dimensions are roughly 9m (gate to garage) and 4.8m (average width).
Footpath is about 8m long, 1.2m wide.
2x landings at the front and back of the gate are about 1.5m x 1.5m each.
Total area around 60m2.
All concrete finish is "plain" with charcoal in the mix and also on surface.
The desired finish is "an old, darkened, kind of dirty, nondescript" concrete.
Driveway concrete needs saw cuts to create 90cm squares throughout.
Driveway and footpath fall is about 30cm from garage to crossover.
Driveway 3-L11 to internal corners, min 100mm and 25Mpa. SL72 mesh to all areas.
Access for lighter bobcat (or similar) only as crossover is new.
Exposed edge of the crossover needs to be protected.
Clean up site on job completion.
Ready to start week of 13-Nov.
A written quote is required.
Discuss more details on site.
Concreting
I need an area of about 7-8 square meters to be concreted with a thickness of...
Driveway coloured concreting around 60m2
The concreting is for a new driveway and a footpath.
Driveway dimensions are...
Concreting a drive way 2 cars wide by approx 6m long in charcoal
basic concrete pad to park 2 cars.area is currently paved ,i will remove...
Pavement work using black concrete
Pavement work using black concrete for a single car park area.