Already a Service Central user? Log in here
Remove and replace damaged flat-roofed 2.3 metres x 2.3 metres entry porch
Carpentry: Carpentry Repairs & Maintenance
in Gladesville, NSW 2111
14 August 2019
Corner Square Front Entry Porch. Existing 2.3 metres x 2.3 metres flat roof (galvanised metal roof) is damaged, with a large hole in centre, which is fixed to a timber frame work, and lined with a...
Removal of non load bearing wall, covert sliding door to conventional door,
Carpentry: General Carpentry
in Gladesville, NSW 2111
7 November 2014
I have recently purchased a house at Gladesville and need to get some work completed on the 2nd & 3rd of December. Attached is a floor plan, between the kitchen & utility is a non load bearing...
Timber frame
Carpentry: Complete House Frames
in Gladesville, NSW 2111
30 April 2014
Double storey timber frame and roof trusses
Timber frame for new duplex
Carpentry: Complete House Frames
in Gladesville, NSW 2111
4 March 2014
Timber frame structure for new double storey Duplex
Cutting bottom of doors
Carpentry: General Carpentry
in Gladesville, NSW 2111
19 July 2013
2 Doors require cutting at the base due to installation of tiles. Remove doors, cut and reinstall.
Wide stairs built off decking
Carpentry: Decking
in Gladesville, NSW 2111
11 December 2012
2 steps about 4m wide to replace existing steps need to be built off decking.
Gutter and fascia replaced
Carpentry: Carpentry Repairs & Maintenance
in Gladesville, NSW 2111
23 July 2012
Remove approximately 12 metres of existing gutter and fascia board and replace with new colourbond gutter and timber fascia board.
Deck Extension on existing deck at rear of house
Carpentry: Decking
in Gladesville, NSW 2111
26 September 2011
Wanting an extension done on existing deck,may consider complete new deck as well in hardwood, existing is pine, wanting staining or oiled as well
Fascias on house replaced
Carpentry: Carpentry Repairs & Maintenance
in Gladesville, NSW 2111
19 July 2011
Need Fascias on a single story semi-detached house replaced. Approximate length of fascia would be 25 metres.
Build kitchen cupboard under existing bench
Carpentry: General Carpentry
in Gladesville, NSW 2111
22 March 2011
Existing kitchen has island bench - want to build cupboard 3m x 1m approximate with sliding doors and shelving. Doors to match existing kitchen cupboard doors (beech).
Reverse the opening of External French doors
Carpentry: Doors
in Gladesville, NSW 2111
27 September 2010
French doors that open to deck currently open inwards. Would like them reversed so they open outwards. 2 doors with a window either side.
French Doors need to be reversed so they open outwards
Carpentry: Doors
in Gladesville, NSW 2111
17 June 2010
French doors that open to deck currently open inwards. Would like them reversed so they open outwards. 2 doors with a window either side.
Fit window locks to double-hung timber windows, re-hang internal door etc
Carpentry: Carpentry Repairs & Maintenance
in Gladesville, NSW 2111
3 February 2010
I have several timber double-hung (sash) windows that need window locks fitted. There is also an internal door that needs to be re-hung, and an area above a door that needs to be boxed in.
2x timber decks for duplex, approx 6x3ea deck
Carpentry: Decking
in Gladesville, NSW 2111
14 July 2008
Build of a timber deck, for a new duplex 6 - 8 weeks from construction, for both units. 2 decks aprox 6 by 3 meters, height of 1.5 - 2 meters. i have plans in both hard and soft copy to...
Replace fascia and barge capping to roof eaves
Carpentry: Carpentry Repairs & Maintenance
in Gladesville, NSW 2111
23 October 2007
Remove and dispose of all rotted timbers to front roof eaves inc internal timber trimmers as required; supply and install new timber fascia and barge capping to roof eaves; suppy and install roof...
REPAIR OUTDOOR DECK - CARPENTER
Carpentry: Carpentry Repairs & Maintenance
in Gladesville, NSW 2111
15 August 2007
REPAIR OUTDOOR DECK - CARPENTER