Cabinet Making Quotes
from local cabinet makers
Kitchen Cabinet modification & new timber bench with new sink installation
AMP requested 3 quotes from Cabinet Makers in Boronia Heights
I have the following materials; 2x Birchwood table top with routed edge �uncut� L2400mm x W600mm and Kitchen Sink for installation
Job description:
1. Remove existing kitchen bench top L2540mm (L shape) and sink (no taps, just plumbing). Birchwood bench needs to be diagonally cut for the corner join. (No lacquering required.) Install new sink.
2. Modify existing cabinet to be approx. 55mm smaller which should allow a stove cavity of 635mm. (Upright Stove = L&W600mm). Reuse materials if possible.
Off cuts and debris to be kept by Owner
Quote Details
- Suburb Boronia Heights, QLD 4124
- Specialisation Kitchen Cabinets
- Date Listed 13 Feb 2014 - 9:34 am
Similar Quote Requests
Extend kitchen cuboard and bench top
I have a kitchen of approx four years old looking to extend one part by...
Make and fit cuboard & bench top to match exsisting
I have a kitchen of approx four years old looking to extend one part by...
Cabinet making
Needing cabinets made for kitchen and bathroom.
Replace bench tops and cupboard doors with laminex wall cupbo
cupboards in very good condition need facelift install cupboards on wall...
Cabinet Making Quotes
from local cabinet makers
