Cabinet Making Quotes
from local cabinet makers
Digital Piano cabinet
Luke requested 3 quotes from Cabinet Makers in Potts Point
What I'm hoping to have built is a stand for a digital piano (a keyboard) which resembles a real piano, so the keyboard can sit on a shelf and be played as if you were playing a real upright piano. I have seen examples online at http://www.grandillusionpianoshells.com/products.asp (see the upright model).
I'd like to use a very light-weight wood, and to have it finished in polished black - again so it resembles a real piano.
The measurements:
The shelf for the keyboard would need to fit this model: http://www.roland.com/products/rd-800/specifications/ (see website for precise specs - 1400mm wide) so a total width of approx 1440mm with the wood panels on either side of the keyboard
The height of the keys on the keyboard should be 710mm from the floor.
The rear panel should be max height 1150mm.
Depth from back to front-edge of keys: approx 500mm
I'd like to be able to insert foot pedals and drop the wiring from the rear of the keyboard to the pedals through the hollow of the rear-casing
And finally, I'd like the front panels (both on top above the keyboard and below the keyboard) to have sliding panel doors, so the inside of the hollow case could be used as a shelf (to put speakers and a computer monitor on).
Quote Details
- Suburb Potts Point, NSW 2011
- Specialisation General Finish Carpentry
- Date Listed 21 Mar 2016 - 4:49 pm
Similar Quote Requests
Aquarium cabinet
i’m after a quote for a fish tank cabinet.
doesn’t need any facing engraving...
Remodel my dining table
My solid ash dining table needs to be pulled apart, cut down, remodelled and...
Doors for bookshelves & a new wine rack
I have 3 existing bookcases that I need very simple doors measured and put...
Custom shelves made for a wall
We have a bare concrete wall in our office and need some custom shelves...
Cabinet Making Quotes
from local cabinet makers
