Cabinet Making Quotes
from local cabinet makers
Cabinet maker to build bathroom vanity unit
Kaz requested 3 quotes from Cabinet Makers in Turramurra
Hi there,
I'm looking for a corner bathroom vanity - my rough drawing is attached as a PDF file.
1. Size is 600 mm by 800 mm. 870 mm high.
2. The section on the right hand side where the drawers are would be a maximum of 350mm wide.
3. The measurement from the point in the corner to the front of the unit should be fine as long as it didn't exceed 650mm.
4. Unit would be white polyurethane.
5. Top would be white Quartzstone - we like "Luna White" for the top. Or if this is really expensive a white ceramic top/basin would be fine.
6. Basin underneath is white ceramic - size to suit the unit. Please advise what size - we're pretty flexible.
7. In the top we need 2 holes drilled suitable for Pillar Cock Taps (we have the taps - these are The Canterbury range from Posh in chrome if you need to know that.
8. Not sure if it comes with a plug and waste - but need to have the necessary bits in chrome.
My rough drawing and full specs are available on-line at http://www.business-sense.com.au/html/bathroom_vanity.html
Thanks
Kaz
Quote Details
- Suburb Turramurra, NSW 2074
- Specialisation Vanities
- Date Listed 2 Jun 2009 - 12:17 am
Similar Quote Requests
Build bathroom vanity
I would like to replace our existing vanity. It is approx. 88cm wide and 65cm...
Vanities with stone tops
Need 3 vanities with stone tops - 2 x 1400; 1 x 1000; all single basins; no...
Repair bathroom vanity cupboard door
Laminate on door has cracked and come away from the wooden door. Laminate is...
Build a bookcase
i need someone to build a floor to ceiling bookcase. needs to be...
Cabinet Making Quotes
from local cabinet makers
