Building Quotes
from local builders
Modification of 2 x Load bearing walls
James requested 3 quotes from Builders in Zillmere
We need 1 x load bearing wall removed(runs side to side) and another cut to a height on 1200mm(runs front to back) from our house, built 1940's, to make the kitchen, dinning, laundry and lounge an open plan living area. Our roof is of minimal pitch with little roof cavity, no man hole, with 500mm spaced rafters(Hard Wood) running from front too back and an internal roof height of 2800mm at maximum. Currently the span of the lounge is 5000mm with a external support beam at 4m supported by a wall and two posts at the other end. The wall to cut to a height of 1200mm will separate the lounge and kitchen and is 2300mm long. The wall to remove separates the kitchen and laundry and we want 650mm of the wall from floor to ceiling left at one end and the remainder removed, including the current doorway. Access to see inside the roof can be done from inside the house as parts of the gyprock have been removed during renovations.
Quote Details
- Suburb Zillmere, QLD 4034
- Specialisation Home Extensions
- Date Listed 16 Oct 2007 - 7:45 pm
Similar Quote Requests
Build new room 36m sq and patio
A new room built (roughly 36m2) and a patio
Turn garage into living rm,design/build/brklaying,render of brkwork etc
We have a 7 year old brick & tile home with a built in double lock up garage...
Rear Extension and ground floor extension with upper terrace.
Aprox 70sqm of extension, 30sqm rear gable end and 40sqm new ground floor...
Rear Extension and ground floor extension with upper terrace.
Aprox 70sqm of extension, 30sqm rear gable end and 40sqm new ground floor...
Building Quotes
from local builders
