Building Quotes
from local builders
Balcony - installation of half spoon drain on tiled balcony
Justin requested 3 quotes from Builders in Cammeray
1) cut back and remove tiles down to concrete slab at balcony junction with balustrade (say 65mm) for length of balcony;
2) excavate into concrete slab (if necessary, as there may only be scree from cover over of original half spoon drain) to enable construction of half spoon drain (lip of drain once constructed to be level with concrete slab to enable run off from concrete slab to be caught);
3) test balcony to identify low points at balustrade;
4) if required, remove old spitters and install new spitters at low points (use of 2 inch spitters if possible to minimise blockages from silt);
5) build half spoon drain with falls to identified low points;
6) apply waterproof membrane over half spoon drain and up the balustrade wall, say 75mm); and
7) repaint internal face of balustrade wall in colour to match original.
Quote Details
- Suburb Cammeray, NSW 2062
- Specialisation General Building Work
- Date Listed 25 Jan 2010 - 11:21 am
Similar Quote Requests
Carpentry work
Carpentry work to Floors, joists,doors, windows ect.
A laundry renovation
I would like to have built in cupboards and sink and open shelves on the top....
Building of pergola
small 5700 X 2100 aluminium with tinted pergola with yinted polycarbonate...
Balcony - installation of half spoon drain on tiled balcony
1) cut back and remove tiles down to concrete slab at balcony junction with...
Building Quotes
from local builders
