Landscapers
Jobs for Landscapers - Shade Sail Design
1. Protect decking area from sun
2. Withstand very strong wind
3. Accommodate house design. House has been architect designed, with 45 degree pitched roof, with various sections of roof at different heights. Shade sail will have a reasonable pitch and must complement house design.
4. Four fitting points are likely to be needed:
1 full post needed
2 points on facia and/or brick and/or weatherboard (ie, house wall)
1 on roof.
Service Central searched for quality
landscapers in Geelong
for Derek.
Post your landscaping job
We have purchased a 5.4 x 5.4 Coolaroo shade sail and are looking at having it installed. Have fittings.
Service Central searched for quality
landscapers in Melbourne
for Shiranee.
Post your landscaping job
Require design and installation of shade sails over the back decking. The decking faces the west and is off the second storey of the house. Approximate size of the decking is 3.5 Metres x 5 metres, it also extends down the south side of the house, that section being 4 metres x 1.5 metres approx. House is under construction with an estimated completion date of mid January 2009.
Service Central found 2 quality
landscapers (Melbourne)
for Gail.
Post your landscaping job
Supply and installation of shade sail/s at rear of property to cover paved area plus garden approx 10 metres by 3 metres-a strong structure is required.
Service Central searched for quality
landscapers in Melbourne
for Jennie.
Post your landscaping job
Nov 05: In Reservoir, Melbourne, VIC
Supply & installation of shade sail for driveway approx 3.7 x 4mts
Quote, supply & install shade sail to driveway. Around 3.7 x 4 metres.
Service Central searched for quality
landscapers in Melbourne
for Firth.
Post your landscaping job
I have a deck area that is rectangular, approximately 3.6 x 4.9. Howver, the sail will need to be different shap due to a tree placed next to the deck.
The deck is located within a courtyard, and is surrounded by brick walls on three sides, therefore the walls will need to be used as anchor points.
Service Central searched for quality
landscapers in Sydney
for Scott.
Post your landscaping job
Design, supply and install a shade sail appoximate size 4m x 4m, over a backyard deck area. Double story house, one side against a 2 story brick wall (ie mounted against brickwall mid way up), other side against a single story section, (ie can be mounted at roof level). Will require at least one post. Council permit not required - confirmed with wyndham council.
Service Central found 1 quality
landscaper (Melbourne)
for Mike.
Post your landscaping job
Req custom made Shade sails.No dimensions. 1x2metres approx.
Service Central searched for quality
landscapers in Melbourne
for Peter.
Post your landscaping job
Jul 15: In Rouse Hill, Sydney, NSW
Design/install preferably waterproof shade sail around swimming pool, 30sqm
Designing the shade sail to be installed around the swimming pool in the backyard. I need a quote for supplying the materials and installation and also just the materials itself. The shade sail needs to cover and protect an outdoor setting and waterproof material is preferred.
Service Central searched for quality
landscapers in Sydney
for Sandy.
Post your landscaping job
May 06: In Ipswich North, Brisbane, QLD
Manufacture & deliver cantilevered shade for 3mtr2 space in BELLMERE
Material: for post and frame structure
Cover: made from light colored, waterproof material.
To cover a space of 3-metres wide between an existing 1.8m timber fence and the gutter from a lowset house with a cantilevered shade structure. Total length of the structure will be 9 metres.
LOCATION NOTE: customer is in BELLMERE - no Ps for this area. Big budget and IPSWICH within half-hour - listed for Ipswich with Location in Notif Info.
Service Central searched for quality
landscapers in Brisbane
for John.
Post your landscaping job
Skdfjls.
Service Central searched for quality
landscapers in Brisbane Surrounds
for Danial.
Post your landscaping job

