Jobs posted for Vanities in Victoria
Welcome to the Service Central Jobs Board.
This is a list of jobs posted by our customers for our registered providers. Post your job for free, or register now to accept jobs.
Now viewing Cabinet Maker, Cabinetmaker - Vanities jobs in Victoria
Cabinetry on site. Vanity to be installed and benchtop template needed. Laundry cabinets to be installed. Access door to be installed.
Service Central searched for quality cabinet makers in Melbourne for Illan.
Post your job
Need a 1600 x 550 vanity unit constucted consisting of 2 doors & 2 sets drawers. Preferably with two pack paint finish. Vanity top and basins not required. I have also posted a seperate job for a laundry cabinet.
Service Central found 2 quality cabinet makers (Melbourne) for Elaine.
Post your job
We have a cabinet which needs to sprayed in 2pac. The colour will need to be matched to some existing furniture in 2pac. Measurements are 100cm(l) x 64(w) x 74(h). The doors will not need to be sprayed as they will have a different finish.
Service Central searched for quality cabinet makers in Melbourne for Amali.
Post your job
Build and instal bathroom vanity cupboards.
Service Central searched for quality cabinet makers in Melbourne for Steve.
Post your job
We have an existing vanity which we would like to update and put a stone benchtop (ceasor stone). We would just like to update the vanity (doors and drawers) without having to tear out the carcass as it just needs a face lift (laminating of drawers, doors).
Someone would need to come out and quote on what could be done with the vanity.
Service Central found 1 quality cabinet maker (Melbourne) for Marco.
Post your job
May 23: In Wheelers Hill, Melbourne, VIC
Ensuite and built in dresser to be upgraded in Wheelers Hill.
I have a client in Wheelers Hill who wants to replace her built in dresser and do up her ensuite with new vanity and shower toilet units.
They wanted me to org it for them as I hve organised most of the house improvements for them so far. I do not have a trade in this area that I use regularly and my Kitchen installer is unavailable.
Service Central found 2 quality cabinet makers (Melbourne) for Andrew.
Post your job
Need a custom vanity unit built for one bathroom. Unit to run between 2 walls and has ducted heating pipe running through back of unit. 187 cm width. Have the laminate already.
After stone benchtop. Have already purchased undermount sink.
Service Central found 1 quality cabinet maker (Melbourne) for Andrew.
Post your job
May 10: In Footscray West, Melbourne, VIC
2m x 2.5m bare laundrey requires cupboards, bench and tub installed.
2m x 2.5m bare laundry requires floor to ceiling cupboard installed on one wall and a long bench with laundry tub and high cupboards installed on the opposite wall. Also require a sliding door to be fitted to the room and finishing timber work around the window frame.
Service Central searched for quality cabinet makers in Melbourne for Jeremy.
Post your job
Apr 25: In Prahran East, Melbourne, VIC
Require free standing bathroom vanity unit to be custom built
Vanity unit to be made in white laminate or with a white gloss surface
650x500xH860
I am supplying the drop in basin.
Service Central found 1 quality cabinet maker (Melbourne) for Alison.
Post your job
Wall hung bathroom vanity unit to be made.
Only the cabinet.
We are supplying the top and sinks.
I have a diagram which can be emailed through containing dimensions and finishes.
Service Central found 1 quality cabinet maker (Melbourne) for Alan.
Post your job
I need to re-laminate and existing vanity bench top in bathroom size 117 length x 52 deep.
Service Central searched for quality cabinet makers in Melbourne for Jane.
Post your job
Apr 07: In Armadale, Melbourne, VIC
Re Laminate Bathroom Vanity benchtop, and replace cupboard doors
120cm x 52cm benchtop with 120cm x 15cm drop. Hole cut for the basin.
Doors measure 60cm x 50cm (x2)
Laminate with a stone benchtop design.
Service Central searched for quality cabinet makers in Melbourne for Ewan.
Post your job
Apr 07: In Ascot Vale, Melbourne, VIC
Drawer in bathroom cabinet has come off track. Track/drawer needs fixing.
Drawer in bathroom cabinet has come off track. Track is too small for drawer and has separated due to weight of drawer, so ball bearings now fall out. Track looks cheaply made (likely made in China). Track/drawer needs to be fixed/replaced. Vanity is approximately 5 years old.
Service Central searched for quality cabinet makers in Melbourne for Liesel.
Post your job
2 bathroom vanites custom made with laminex or 2-pac 1 is 1000mm and 1 is 1100mm, 20mm caesaer stone bench. I will send drawings.
Service Central searched for quality cabinet makers in Melbourne for Fadwa.
Post your job
Apr 01: In Ascot Vale, Melbourne, VIC
Drawer in bathroom cabinet has come off track. Track/drawer needs fixing.
Drawer in bathroom cabinet has come off track. Track is too small for drawer and has separated due to weight of drawer, so ball bearings now fall out. Track looks cheaply made (likely made in China). Track/drawer needs to be fixed/replaced. Vanity is approximately 5 years old.
Service Central searched for quality cabinet makers in Melbourne for Liesel.
Post your job
1 wall hung vanity
860mm wide x 900mm high x 500mm deep
1 in built vanity
800mm wide x 500mm high x 340mm deep
Both with 2 doors in a white vinyl wrap with laminate bench top.
Service Central found 1 quality cabinet maker (Melbourne) for Caroline.
Post your job
Looking to replace current vanity benchtop, 2 doors and one side panel with new vinyl wrapped (white) doors. Approximate dimensions of vanity is 1200mm long, 400mm wide, 800mm high (to be confirmed).
Service Central searched for quality cabinet makers in Melbourne for Kym.
Post your job
I need a bathroom vanity built according to the following specifications:
-W900mm X D460mm X H600mm
-Made from quality oak -total of 1x soft closing cupboard and 3x soft closing drawers -Ceasarstone top with round ceramic/porcelain above counter basin
-stainless steel handles -
Either wall hung or free standing style.
Service Central searched for quality cabinet makers in Melbourne for Elie.
Post your job
I need a bathroom vanity built according to the following specifications:
-W90mm X D460mm X H600mm
-Made from quality oak
-total of 1x soft closing cupboard and 3x soft closing drawers
-Ceasarstone top with round ceramic/porcelain above counter basin
-stainless steel handles
-either wall hung or free standing style.
Service Central searched for quality cabinet makers in Melbourne for Elie.
Post your job
Looking to replace the 2 doors of our old bathroom vanity as well as one of the sides and the vanity top to a white semi-gloss surface.
Service Central searched for quality cabinet makers in Melbourne for Kym.
Post your job
Our laundry room need a new cabinet for the laundry appliances (dryer and washer and washing basin). Also, need to mount a dryer on the wall and extend the exhaust hose ceiling exhaust outlet.
Service Central found 2 quality cabinet makers (Melbourne) for Alan.
Post your job
Specifications available on discussion. Custom make bathroom cabinet required.
Service Central searched for quality cabinet makers in Melbourne for Katherine.
Post your job
Jan 18: In Melbourne, Melbourne, VIC
Melb CBD Apartment needs some repairs to bathroom and kitchen cabinets
2 bathroom vanities need repairs, the tops will need to be replaced and some work is also required to the kitchen, ie doors to be adjusted and repaired.
Service Central found 2 quality cabinet makers (Melbourne) for Ned.
Post your job
Jan 12: In Melbourne, Melbourne, VIC
Melb CBD Apartment needs some repairs to bathroom and kitchen cabinets
2 bathroom vanities need repairs, the tops will need to be replaced and some work is also required to the kitchen, ie doors to be adjusted and repaired.
Service Central searched for quality cabinet makers in Melbourne for Ned.
Post your job
Jan 04: In Ascot Vale, Melbourne, VIC
Drawer in bathroom cabinet has come off track. Track/drawer needs fixing.
Drawer in bathroom cabinet has come off track. Track is too small for drawer and has separated due to weight of drawer, so ball bearings now fall out. Track looks cheaply made (likely made in China). Track/drawer needs to be fixed/replaced. Vanity is approximately 5 years old.
Service Central found 1 quality cabinet maker (Melbourne) for Liesel.
Post your job
